NANO Shine Coat 9H, 1.0 l.

Ceramic coating for cars NANO SHINE COAT 9H, intended for Professional use

NANO SHINE COAT is a state-of-the-art care product designed for long-term body protection. Due to the special coating formula, a strong and dense protective layer of 3D matrix structure is created on the surface, which creates a 9H level of resistance - protects against scratches, salts, bird droppings, acid rain, UV rays and careless drivers who slam their doors into your car :)

With NANO SHINE COAT ceramic coating, your car body:

• Stays clean for a longer period of time
• Becomes more resistant to scratches (9H pencil test)
• Acquires long-term protection against UV rays, acids, alkalis, salts
• Acquires chemical resistance (pH 1-12)
• Gets a healthy, deep polish shine
• It is extremely easy to wash and maintain , so it will require less effort and time

What do you need to know?

• It is suitable for covering various painted surfaces, so glass cannot be covered with this product!
• Field of application: cars, motorcycles, yachts
• After covering the body, 6 h. the surface must be untouched and protected from dirt, water and precipitation.
• After 24 hours, the coating fully hardens and becomes resistant to the environment

Detailed instructions for use

To ensure the best effect of the ceramic coating, read the instructions carefully ! They are included in the kit, and you can also download the instructions here .

What should you pay attention to?

• Before coating, the car must be fully prepared : thoroughly washed, degreased and dried. Make sure that there is no water left in the gaps between the parts that could come into contact with the coating during application.
• During application, the surface temperature must be between +5 °C and +25 °C.
• Cover only part of the body at a time , e.g. half of the hood or door - no larger than 1 m2 area. This is necessary so that the ceramic coating does not have time to fully harden and it can be easily polished.
• Please note that the coating should be rubbed in horizontal and vertical movements (this is done in order to fill all the micro-gaps).
• Do not leave the surface unwiped! The nano coating hardens by reacting with air, so it is necessary to wipe off the excess coating immediately with a microfiber cloth.
• After application, discard the cloths. The remnants of the nano coating crystallize and can scratch the surfaces being cleaned, so we throw the cloths away and do not wash them.

Specification