Disposable nano coating for acrylic/plastic (10/10 ml)

Designed for easier maintenance!

This nano coating is intended for coating plastic, acrylic and organic glass surfaces: bathtubs, shower cabins, sinks.

The coated surface acquires strong hydrophobic properties, which not only significantly reduces the accumulation of lime and other dirt, but also facilitates surface cleaning. For cleaning, we recommend using a microfiber cloth moistened with water.

Properties of disposable nano coating for acrylic/plastic:

• Easy to use
• The coated surface acquires strong hydrophobic properties, which reduces the formation of limescale and other impurities
• Surface cleaning becomes easier
• Long-term effects

How to use nano coating on acrylic/plastic?

1. Before use, make sure that the surface you are going to apply is completely dry, clean and free of grease. If there is dirt on the surface, clean it thoroughly with a regular cleaner.
2. The packaging contains skin-drying agents, so we recommend wearing gloves.
3. Open the "Degreasing" compartment (left side of the package) and take out a wet wipe.
4. Thoroughly clean (degrease) the entire surface to be coated with the wipe in this section.
5. Wait 30-60 seconds for the degreaser to soak in and the surface to be completely dry.
6. Open the "Nano coating" compartment (right side of the package) and take out the wet wipe inside.
7. Using even, overlapping circular motions, carefully and gently rub the entire surface you want to cover - clean until the wipe is damp.
8. After the wipe is dry, take a clean, dry paper towel and wipe the entire coated surface until it is shiny.

Attention: the surface must be dry, untouched, protected from dirt for at least 2 hours (recomm. 10-12 hours). We recommend using a microfiber cloth moistened with water for cleaning. If the product gets into the eyes or mouth, rinse with plenty of clean water.